Agilent Analytical Laboratory Consumables
02
ZORBAX Series
Industry-standard high-purity silica columns, benchmark for run-to-run and column-to-column reproducibility
Bonded phases: C18, C8, C3, CN, NH₂, Phenyl, Bonus-RP, Extend-C18, SB
Bonded phases: C18, C8, C3, CN, NH₂, Phenyl, Bonus-RP, Extend-C18, SB
Ideal for pharmaceutical impurity profiling, stability testing and assay method transfer
02
Eclipse Series
Eclipse Plus C18, Eclipse XDB-C18 / C8, Eclipse AAA
Mid-pH stable silica, optimized for neutral and basic compound analysis
Key use: high-throughput pharmaceutical QC, peptide mapping, forced degradation studies
Mid-pH stable silica, optimized for neutral and basic compound analysis
Key use: high-throughput pharmaceutical QC, peptide mapping, forced degradation studies
02
Poroshell Series
Superficially porous particle (SPP) columns for fast, high-efficiency separations
Phases: Poroshell 120 EC-C18, SB-C18, HILIC, PFP
Key use: UHPLC method transfer, fast QC release testing
Key benefit: 2–3× faster separations than fully porous 5 µm columns, with comparable system backpressure
Phases: Poroshell 120 EC-C18, SB-C18, HILIC, PFP
Key use: UHPLC method transfer, fast QC release testing
Key benefit: 2–3× faster separations than fully porous 5 µm columns, with comparable system backpressure
02
AdvanceBio Series
Biomolecule columns for protein, peptide, antibody and glycan analysis
Product lines: AdvanceBio SEC, AdvanceBio Peptide Mapping, AdvanceBio Glycan Mapping
Optimized for biopharmaceutical QC and structural characterization
Product lines: AdvanceBio SEC, AdvanceBio Peptide Mapping, AdvanceBio Glycan Mapping
Optimized for biopharmaceutical QC and structural characterization
02
Guard Columns & Cartridges
Matching guard cartridges and holders for all above chemistries
Protect analytical columns from particulates and strongly retained matrix impurities
Available in multiple packaging options
Protect analytical columns from particulates and strongly retained matrix impurities
Available in multiple packaging options
02
DB Series
Non-polar to mid-polar: DB-1, DB-5, DB-17, DB-1701, DB-210, DB-225
Polar: DB-WAX, DB-Wax FF, DB-FFAP
Common dimensions: 0.25 mm ID × 30 m, 0.25 µm film; also available in 0.32 mm / 0.53 mm ID and 15 m / 60 m lengths
Ultra Inert version available for active analytes and trace-level detection
Premium J&W GC columns covering full polarity range. Excellent inertness and thermal stability. Standard for pharma, environmental and food analysis.
Polar: DB-WAX, DB-Wax FF, DB-FFAP
Common dimensions: 0.25 mm ID × 30 m, 0.25 µm film; also available in 0.32 mm / 0.53 mm ID and 15 m / 60 m lengths
Ultra Inert version available for active analytes and trace-level detection
Premium J&W GC columns covering full polarity range. Excellent inertness and thermal stability. Standard for pharma, environmental and food analysis.
02
HP Series
HP-1, HP-1ms, HP-5, HP-5ms, HP-88, HP-FFAP, HP-PLOT, HP-Innowax, etc.
General-purpose columns for routine environmental and pharmaceutical testing
Cost-effective general-purpose GC columns. Delivers reliable, consistent performance for routine QC and standard method compliance in daily testing workflows.
General-purpose columns for routine environmental and pharmaceutical testing
Cost-effective general-purpose GC columns. Delivers reliable, consistent performance for routine QC and standard method compliance in daily testing workflows.
02
CP Series
CP-Sil 5 CB, CP-Sil 8 CB, CP-Wax 52 CB, CP-Volamine, CP-Sil PONA
Application-tailored capillary columns optimized for specific compound classes (hydrocarbons, amines, FAME, aromatics). Pre-aligned with standard industrial test methods.
Application-tailored capillary columns optimized for specific compound classes (hydrocarbons, amines, FAME, aromatics). Pre-aligned with standard industrial test methods.
02
Application-Specific Columns
Select FAME, Select PAH, Select PCB for targeted compound classes
Targeted high-selectivity columns for trace analysis of specific analytes (PAHs, PCBs, FAMEs, pesticides). Designed for fast, focused screening workflows.
Targeted high-selectivity columns for trace analysis of specific analytes (PAHs, PCBs, FAMEs, pesticides). Designed for fast, focused screening workflows.
02
Autosampler Vials
2 mL screw-thread / crimp-top vials: clear and amber glass, certified LC/GC grade
1.5 mL polypropylene vials for high-throughput screening
Available with write-on patches and graduation marks; 100/pk and 1000/pk bulk packs
Key benefit: low extractables, uniform vial dimensions for reliable autosampler handling
1.5 mL polypropylene vials for high-throughput screening
Available with write-on patches and graduation marks; 100/pk and 1000/pk bulk packs
Key benefit: low extractables, uniform vial dimensions for reliable autosampler handling
02
Septa & Caps
PTFE/silicone septa in pre-slit, pinhole and plain styles
9 mm, 10 mm, 11 mm screw caps and 11 mm, 20 mm crimp caps
Low-bleed formulation recommended for GC trace analysis
9 mm, 10 mm, 11 mm screw caps and 11 mm, 20 mm crimp caps
Low-bleed formulation recommended for GC trace analysis
02
Syringes & Needles
GC autosampler syringes: 1 µL, 5 µL, 10 µL volumes
LC injection needles in PEEK and stainless steel
Compatible with 7693, 7683, 1200, 1260, 1290 series autosamplers
LC injection needles in PEEK and stainless steel
Compatible with 7693, 7683, 1200, 1260, 1290 series autosamplers
02
Sample Preparation Consumables
SPE cartridges, filter vials and syringe filters
Bond Elut Solid Phase Extraction (SPE)
Sorbents: C18, C8, NH₂, SAX, SCX, PBA, silica, Florisil
Formats: 1 mL, 3 mL, 6 mL, 12 mL cartridges; 96-well plates
Key use: sample clean-up before HPLC/GC, bioanalytical testing
Bond Elut Solid Phase Extraction (SPE)
Sorbents: C18, C8, NH₂, SAX, SCX, PBA, silica, Florisil
Formats: 1 mL, 3 mL, 6 mL, 12 mL cartridges; 96-well plates
Key use: sample clean-up before HPLC/GC, bioanalytical testing
02
Deuterium Lamps
Available in standard and extended-lifetime (2000+ hr) versions
Optimized for Agilent VWD, DAD and MWD UV detectors
Delivers low baseline noise and stable spectral output across 190–600 nm
Direct fit for 1100, 1200, 1260 and 1290 Infinity LC systems
Optimized for Agilent VWD, DAD and MWD UV detectors
Delivers low baseline noise and stable spectral output across 190–600 nm
Direct fit for 1100, 1200, 1260 and 1290 Infinity LC systems
02
Tungsten & Halogen Lamps
For visible-range and extended-wavelength detection (350–1100 nm)
Long-life designs for UV-Vis, RI and ELSD detectors
Factory-aligned for consistent photometric response
Drop-in replacement for Agilent 1200/1260/1290 detector modules
Long-life designs for UV-Vis, RI and ELSD detectors
Factory-aligned for consistent photometric response
Drop-in replacement for Agilent 1200/1260/1290 detector modules
02
Specialty Lamps & Optical Parts
Hollow cathode lamps for atomic absorption elemental analysis
Xenon lamps for fluorescence and RF detector systems
Replacement flow cells, optical windows, mirrors and grating assemblies
Built to original equipment specifications for reliable performance
Xenon lamps for fluorescence and RF detector systems
Replacement flow cells, optical windows, mirrors and grating assemblies
Built to original equipment specifications for reliable performance
02
GC / LC System Consumables
GC inlet consumables
Split / splitless liners (glass wool, wool-free, deactivated)
Injection port septa – low-bleed, long-life, high-temperature grades
Ferrules: graphite, Vespel™, graphite/Vespel blend
LC pump & autosampler consumables
Pump seals, plungers, rotor seals, check valves
Autosampler needles, syringes, needle seats
Tubing & fittings
PEEK, stainless steel, PFA, fused-silica tubing
Unions, tees, adapters, finger-tight fittings
Split / splitless liners (glass wool, wool-free, deactivated)
Injection port septa – low-bleed, long-life, high-temperature grades
Ferrules: graphite, Vespel™, graphite/Vespel blend
LC pump & autosampler consumables
Pump seals, plungers, rotor seals, check valves
Autosampler needles, syringes, needle seats
Tubing & fittings
PEEK, stainless steel, PFA, fused-silica tubing
Unions, tees, adapters, finger-tight fittings
02
Instrument Maintenance Kits & Spare Parts
LC Pump & Autosampler Kits
Preventive maintenance kits for 1200, 1260, 1290 series
Seal-wash kits, plunger seal kits, needle seal kits
GC Inlet & Detector Kits
Inlet maintenance kits, FID repair kits, ECD/NPD source kits
Filaments, electron multipliers and jet assemblies
Mass Spectrometry Consumables
ESI needles, spray chambers, skimmer cones, sample cones
Vacuum pump oil, oil mist filters, desolvation gas lines
Preventive maintenance kits for 1200, 1260, 1290 series
Seal-wash kits, plunger seal kits, needle seal kits
GC Inlet & Detector Kits
Inlet maintenance kits, FID repair kits, ECD/NPD source kits
Filaments, electron multipliers and jet assemblies
Mass Spectrometry Consumables
ESI needles, spray chambers, skimmer cones, sample cones
Vacuum pump oil, oil mist filters, desolvation gas lines
02
Capillary Electrophoresis (CE) Consumables
Complete CE consumable range for Agilent 7100, G1600 and PA 800 plus systems.
Bare fused-silica capillaries and coated capillaries
CE vials, caps and electrode assemblies
Buffers, gel cartridges and reagent kits
Bare fused-silica capillaries and coated capillaries
CE vials, caps and electrode assemblies
Buffers, gel cartridges and reagent kits
All Agilent products supplied by AFINE meet original manufacturer specifications
Full traceability and lot identification on all chromatography columns and critical consumables
Compatible with Agilent and other major brand analytical instruments
Product range carefully selected and quality-validated for pharmaceutical and chemical laboratory use
Reliable supply chain with professional technical and application support
Full traceability and lot identification on all chromatography columns and critical consumables
Compatible with Agilent and other major brand analytical instruments
Product range carefully selected and quality-validated for pharmaceutical and chemical laboratory use
Reliable supply chain with professional technical and application support